Charge configuration & time： <1hr for most of
the batteries; 30min-2hour (depend on battery
capacity)
Battery Type：Camcorder / camera Ni/MH battery
(3.6 / 6V 7.2V)
Battery Configuration：
Charging Capacity (with the prespecified charging
time)：Fit to all of the camcorder / camera
batteries that Mach I fit
Charger Specification：Input voltage :100-240V,
input current:0.5A,50-60Hz Output Volatage:12V
Intelligence(ifany) Intelligent MCU,the charger
could supply the optimal charging current for the
battery,thus accelerate the charging speed and
prolong the battery life.
Charge path Configuration：one channel
Cathode Detection：Charge Ni/MH battery only
Polarity Protection：Detects if batteries are
properly oriented in the charger
Defect Detection： Capable of identifying and
preventing charging for detective batteries.
Configuration Detection：Configuration protection
to prevent AAandAAA batteries,Ni-MH and alkaline
batteries from being charged together
Overcharge Protection：Overcharge protection
provided through charge cycle termination
through - V,Max. Voltage, and charging time
Capacity Assurance Post-charge trickle current
(60mA) to ensure capacity.Defective battery auto-
detection
AC Power Specifications：Input Voltage :110V-240V
Output Voltage and Current:12V,2A Switching power
Cord Length:3′
DC Cord Specifications：Input Voltage :12 VDC
Cord Length: 3 ′
LED Indicators： Red light:charging; Green light:
charging finish; flashing LED indicate : battery
fault.
Operating Temperatures：0℃-40℃
Maximum current(A) ：2.2
Dimensions：100mm*100mm*38mm
Other Features：Fitted to all camcroder / camera batteries that Mach I can fit |
|
|
|
|
